Skip to main content
CIMug
Login | Join | Help (new window)


CIMug > Meetings > Charlotte 2009 > Charlotte Blog
Information for meeting attendees and observations on the conference.
Meeting Session Videos
Meeting sessions, including audio, are now available on the Charlotte 2009 meeting site.  These are the presentations, round table discussions and breakout sessions as they were recorded live on GoToMeeting.  You can access the list here:

Session Videos
GotoMeeting Info for Friday Morning
1.  Please join my meeting.
https://www.gotomeeting.com/join/211655963
 
2.  Use your microphone and speakers (VoIP) - a headset is recommended.  Or, call in using your telephone.
Dial 218-844-4923
Access Code: 211-655-963
Audio PIN: Shown after joining the meeting
Meeting ID: 211-655-963

 
In Memoriam
Before our meeting winds down, I wanted to pass on this info.
 
Some of you may have known Janet Dietz - I published a short note about her - click here. Janet was an early contributor to the CIM Users Group, and we will miss her.
 
Tools Working Group Call Info
The following GotoMeeting is for the main room - the Tools working group.
 
1. Please join my meeting.
https://www.gotomeeting.com/join/624516098

2. Use your microphone and speakers (VoIP) - a headset is recommended. Or, call in using your telephone.

Dial 217-287-4119
Access Code: 624-516-098
Audio PIN: Shown after joining the meeting

Meeting ID: 624-516-098
Thursday's GotoMeeting Info

If you are offsite and would like to listen and view presentations, you can do so. The information is below.

1.  Please join my meeting.
https://www.gotomeeting.com/join/589373427

2.  Use your microphone and speakers (VoIP) - a headset is recommended.  Or, call in using your telephone.

Dial 217-287-4118
Access Code: 589-373-427
Audio PIN: Shown after joining the meeting

Meeting ID: 589-373-427

 

Utility Co-Chair Announcement
By now, you should have all received the email Kay Clinard sent out, about how I have left PacifiCorp and can no longer hold the Utility Co-Chair post.

I wanted to remind you about the qualifications:

  • Must be able to commit up to 20% of time to user group activities (including the fall and spring meetings).
  • Must be able to travel internationally for the non-U.S. meetings.
  • Must be generally familiar with CIM and working group activities.
  • Must be employed at a utility or ISO (not a vendor, system integrator, or consulting organization)Must hold the post for a two-year duration (minimum - longer support is welcome)

But hey, walking on water is not required.

The Utility Co-Chair Election page is where you can post your nominations.

I am also attempting to hand off my web support role within CIMug. UCA has hired some additional contracting help, but we need more hands on board

Please hunt me down here at the conference if you care about the future of the collaboration environment that your membership dollars have funded.

GotoMeeting Available
We have set up a GotoMeeting if you would like to monitor presentations and listen in to the conference. Here is the invitation.

1.  Please join my meeting.
https://www.gotomeeting.com/join/226365067

2.  Use your microphone and speakers (VoIP) - a headset is recommended.  Or, call in using your telephone.

Dial 218-844-4925
Access Code: 226-365-067
Audio PIN: Shown after joining the meeting

Meeting ID: 226-365-067

Area Restaurants
Thanks to Arthur Griesser for pointing out that the link to the EPRI Office Brochure didn't work. That has been corrected, and if you are looking for a list of area restaurants, it's a good place to start. Click here.
Look for EPRI Building #2
As you arrive and turn into the EPRI building area, you will have to drive by the first set of buildings (#1) and continue straight on (there is a sign posted there).
 
If you continue up the hill there is a second building (#2). That is where the UCA and CIM meetings are being held.
 
Substation Tour is Cancelled
Our tour is cancelled tomorrow, due to circumstances beyond our control...
 
Thanks,
Kay
1 - 10 Next

 ‭(Hidden)‬ Admin Links